Cjp2 Series New Double Acting Needle Cylinder

• Customization: Available
• Material: Stainless Steel
• Structure: Double Cylinder
• Model NO.: CJP2-B-6
• Power: Pneumatic
• Standard: Standard
• Pressure Direction: Double-acting Cylinder
• Double-Acting Cylinder Type: Double Rod Cylinder
• Trademark: XINGYU
• Origin: Ningbo. China
• Production Capacity: 10, 000per Month

Product Description

                                     CJP2 series new double acting needle cylinder

Product features

Product features	1.Compact structure,small size,light weight,space saving
	2.High precision of piston rod guiding,lubrication is not required
	3.There is a magnetic induction switch slot on the cylinder,which is convenient to install the magnetic induction switch
	4.A variety of cylinder with different bore size for customers to choose from

Ordering  Code:


                                                                                                    

Stroke   

Bore Size(mm)	Standard Stroke(mm)
4	5,10,15,20
6	5,10,15,20,25
10	5,10,15,20,25,30,35,40
12

Parameters

Bore size(mm)	4	6	10	16
Acting type	Double acting
Fluid	Air
Max.operating pressure	0.7Mpa
Min.operating pressure	0.15Mpa	0.12Mpa	0.06Mpa
Ambient and fluid temperature	without magnet switch:-10~70ºC(no freezing), with magnet switch;-10~60ºC(no freezing)
Lubrication	Not required
Piston speed	10-500mm/s
Stroke length tolerance(mm)	+1.0 0
Cushion	Rubber bumper on both sides
Port size	M3X0.5			M5X0.8

Overall Dimension

Symbol/ stroke	Earring model	CD	CK	GB	Q	S	Z	ZZ	S	ZZ
6	C_JP2D6-stroke	3+0.04/0	4	11.5	/	21	34	38	26	43
10	C_JP2D10-stroke	5+0.065/0	6.5	18	17-0/0.050	30.5	44	50.5	35.5	55.5
16	C_JP2D16-stroke	6+0.065/0	10	22	22-0/0.050	34	48	58	39	63

 

Symbol stroke	Trunnion model	CD	CHCKCTCUCX					CY	CZ	Q	T	No built-in magnet		built-in magnet		Trunnion mounting bracket
												Z	ZZ	Z	ZZ
6	C_JP2D6-stroke	3	16	4	12	1.6	18	3.4	26	18.5	20.4	34	38	39	43	CP-T006A
10	C_JP2D10-stroke	5	20	6.5	13.5	1.6	24	4.5	33	20.5	23.9	44	50.5	49	55.5	CP-T010A
16	C_JP2D16-stroke	6	25	10	15	2.9	29	5.5	42	28	31.7	48	58	53	63	CP-T016A

 

Appropriate bore size	φ6	φ10	φ16
A	54°	62°	55°
B	110°	110°	102°

Symbol/ Bore size	A	A'	B	B1	B2	C	D	E	F	F'	GA	GB	H	J	MM	NN	P	No built-in magnet			built-in magnet
																		S	W	Z	S	W	Z
4	6	7	14	10	4	2	1.7	14.5	7	6	4.5	4.5	14	5	M2X0.4	M8X1.0	M3X0.5	12.5	3	29	17.5	3	34
6	7	9	14	14	5.5	2	3	16.5	8	6.5	5.5	6.5	17	6	M3X0.5	M10X1.0	M3X0.5	16	3	33	21	3	38
10	10	12	15	17	7	2.5	4	19	8	6.5	6	7	20	7	M4X0.7	M12X1.0	M3X0.5	19.5	3	39.5	24.5	3	44.5
16	12	14	20	19	8	3	6	24.5	10	8.5	6.5	7.5	24	10	M5X0.8	M14X1.0	M5X0.8	19.5	4	43.5	24.5	4	48.5

Installation and instruction  

Installation and instruction	1. As load is changing during working,a cylinder with sufficient output power should be selected
	2.Under high temperature or corrosive conditions,the corresponding high temperature resistant or corrosion resistant cylinder should be selected.
	3.In the case of high humidity dust,or water droplets and welding slag,the necessary protective measures for cylinder should be taken.
	4.Must clean up the dirt in the pipeline before 0ylinder is connected,in order to keep the inside cleanness of cylinders.
	5.The medium used by Cylinder shall be filtered by filter element (greater than 40μm)before use.
	6.Because the front cover and piston of the cylinder are short,the general stroke cannot be too large.
	7.Anti-freezing measures shall be taken under low temperature environment, in order to prevent moisture from freezing in the system.
	8.Please avoid side load as much as possible during the working process in order to maintain the nonnal operation and working life of the cylinder.
	lf cylinder was leaved unused for long time, watch out to the rusty surface and install dust plug at inlet and outlet. NOTE: DO NOT TAKE DOWN THE FRONT COVER AND BACK COVER.

Company information:

Xingyu Electron(Ningbo)Co.,Ltd. is one of the key enterprises in Chinese pneumatic and valve industry,We specialize in development,manufacturing, marketing and service of pneumatic actuator,angle seat valves,solenoid valves,solenoid coils and DIN connectors;
"Not to be the biggest,but to be the strongest" is our business goal and ideal,let us make best efforts for a better future.

Brief Introduction:
--Approx 30 years' experience in manufacturing solenoid coils;
--Started to make solenoid valves & pneumatic actuators since 2004;
--ISO 9001 and IATF16949 certificated company;
--Main products: pneumatic actuator, Angle seat valves, Solenoid valves, solenoid coils,
  Digital pressure switch, Vacuum generator, E/P regulator;
--Application: Pneumatic & Hydraulic industries, fluid control system,
  air and water treatment system, Automatic industry, etc;

FAQ
Q:Are you a trading company or a factory?
A: We are a factory, manufacturer solenoid coils since year 1990.

Q:After an order is placed, when to deliver?
A: Generally about 10-25days, If we have inventory, we can arrange shipment within 3 days. 
     Please be aware that our production lead times depend on specific items and item quantities. 

Q:What about the warranty ?
A: Normally it is guaranteed for 12 months since dispatching from factory

Q: Can you customized the products?
A: Yes, we have professional R&D team, we supply customized products to customers