Crb2 Series Vane Swing Cylinder

• Customization: Available
• Material: Stainless Steel
• Structure: Double Cylinder
• Model NO.: CRB-B-10
• Power: Pneumatic
• Standard: Standard
• Pressure Direction: Double-acting Cylinder
• Double-Acting Cylinder Type: Double Rod Cylinder
• Trademark: XINGYU
• Origin: Ningbo. China
• Production Capacity: 10, 000per Month

Product Description

                                   CRB2 series vane swing cylinder

Product features

Product features	1.Pipeline port is set with a flat surface, which enables a more firm fixation of connector and improves piping processing quality.
	2.By adopting a special-shaped seal ring and positioner, 270° swing angle of small vane type is realized for the first time.
	3.The installation position of magnetic switch can be set freely by user, and magnetic switch can be fixed at any position in the circumferential direction.

Ordering  Code:


Parameters

Bore size			10	15	20	30	40
Fluid			Air(NO-lube)
Max.Operating pressure			0.7Mpa			1.0Mpa
Min.Operating pressure			0.2Mpa	0.15Mpa
Ambient and fluid temperature			5~60ºC(No freezing)
Rotation time adjustment range(s/90°)			0.03~0.3			0.04~0.3	0.07~0.5
Allowable kinetic energy(J)	Single vane	without cushion	0.00015	0.00025	0.0004	0.015	0.03
		with cushion		0.001	0.003	0.02	0.04
	Double vane		0.0003	0.0012	0.0033	0.02	0.04
Shaft load(N)		Allowable radial load	15	15	25	30	60
		Allowable thrust load	10	10	20	25	40
Port size		Side ported	M3X0.5		M5X0.8
		Axial ported
Angle adjustable range		Single vane	0~230°	0~240°			0~230°
		Double vane	0~90°

Overall Dimension

Model	A	B	C	D	E(g6)	F(h9)	G1	G2	J	K	L	M	N	P	Q1	Q2	Q3	R
																		90°	180°	270°
CRB2BW10-_S	29	15	8	14	4-0.004/-0.012	9 0/-0.036	3	1	5	9	0.5	5	25	24	M3 (6)	3.4 (5.5)	/	M5		M3
CRB2BW10-_SE												8.5	9.5					M3
CRB2BW15-_S	34	20	9	18	5-0.004/-0.012	12 0/-0.043	4	1.5	6	10	0.5	5	25	29	M3 (10)	3.4 (6)	M3 (15)	M5		M3
CRB2BW15-_SE												11	10					M3
CRB2BW20-_S	42	29	10	20	6-0.004/-0.012	14 0/-0.043	4.5	1.5	7	10	0.5	9	25	36	M3 (13.5)	3.4 (11)	M3 (7.5)	M5
CRB2BW20-_SE												14	13
CRB2BW30-_S	50	40	13	22	8-0.005/-0.012	16 0/-0.043	5	2	8	12	1	10	25	43	M3 (18)	3.4 (16.5)	M3 (10)	M5
CRB2BW30-_SE												15.5	14

Model	A	B	C	D	E(g6)	F(h9)	G	K	L	M	N	P	Q	R			Y
														90°	180°	270°
CDRB2BW10-_S	29	15	29	14	4	9	3	9	0.5	10	25	24	M3X0.5 deep5	M5X0.8		M3X0.5	18.5
CDRB2BW15-_S	34	20	29	18	5	12	4	10	0.5	15	25	29	M3X0.5deep5	M5X0.8		M3X0.5	18.5
CDRB2BW20-_S	42	29	30	20	6	14	4.5	10	0.5	20	25	36	M4X0.7deep7	M5X0.8			25
CDRB2BW30-_S	50	40	31	22	8	16	5	12	1	30	25	43	M5X0.8deep10	M5X0.8			25

Model	A	B	C	D	E(g6)	F(h9)	G	H	K	L	M	N	P	Q	R
															90°	100°	180°	270°
CRB2BWU10-_S	29	15	19.5	14	4	9	3	3	9	0.5	10	25	24	M3X0.5deep6	M5X0.8	/	M5X0.8	M3X0.5
															See graph		/
CRB2BWU15-_S	34	20	21.2	18	5	12	4	3.2	10	0.5	15	25	29	M3X0.5deep5	M5X0.8	/	M5X0.8	M3X0.5
CRB2BWU15-_D															M3X0.5		/
CRB2BWU20-_S	42	29	10	20	6	14	4.5	4	10	0.5	20	25	36	M4X0.7deep7	M5X0.8	/	M5X0.8
CRB2BWU20-_D															M5X0.8		/
CRB2BWU30-_S	50	40	13	22	8	16	5	5	12	1	30	25	43	M5X0.8deep10	M5X0.8	/	M5X0.8
CRB2BWU30-_D															M5X0.8		/

Installation and instruction  

Installation and instruction	1. As load is changing during working,a cylinder with sufficient output power should be selected
	2.Under high temperature or corrosive conditions,the corresponding high temperature resistant or corrosion resistant cylinder should be selected.
	3.In the case of high humidity dust,or water droplets and welding slag,the necessary protective measures for cylinder should be taken.
	4.Must clean up the dirt in the pipeline before 0ylinder is connected,in order to keep the inside cleanness of cylinders.
	5.The medium used by Cylinder shall be filtered by filter element (greater than 40μm)before use.
	6.Because the front cover and piston of the cylinder are short,the general stroke cannot be too large.
	7.Anti-freezing measures shall be taken under low temperature environment, in order to prevent moisture from freezing in the system.
	8.Please avoid side load as much as possible during the working process in order to maintain the nonnal operation and working life of the cylinder.
	lf cylinder was leaved unused for long time, watch out to the rusty surface and install dust plug at inlet and outlet. NOTE: DO NOT TAKE DOWN THE FRONT COVER AND BACK COVER.

Company information:

Xingyu Electron(Ningbo)Co.,Ltd. is one of the key enterprises in Chinese pneumatic and valve industry,We specialize in development,manufacturing, marketing and service of pneumatic actuator,angle seat valves,solenoid valves,solenoid coils and DIN connectors;
"Not to be the biggest,but to be the strongest" is our business goal and ideal,let us make best efforts for a better future.

Brief Introduction:
--Approx 30 years' experience in manufacturing solenoid coils;
--Started to make solenoid valves & pneumatic actuators since 2004;
--ISO 9001 and IATF16949 certificated company;
--Main products: pneumatic actuator, Angle seat valves, Solenoid valves, solenoid coils,
  Digital pressure switch, Vacuum generator, E/P regulator;
--Application: Pneumatic & Hydraulic industries, fluid control system,
  air and water treatment system, Automatic industry, etc;

FAQ
Q:Are you a trading company or a factory?
A: We are a factory, manufacturer solenoid coils since year 1990.

Q:After an order is placed, when to deliver?
A: Generally about 10-25days, If we have inventory, we can arrange shipment within 3 days. 
     Please be aware that our production lead times depend on specific items and item quantities. 

Q:What about the warranty ?
A: Normally it is guaranteed for 12 months since dispatching from factory

Q: Can you customized the products?
A: Yes, we have professional R&D team, we supply customized products to customers